;/*++
;
;Module Name:
;
;    SLABVCP.INF
;
;    Copyright 2008, Silicon Laboratories
;
;Abstract:
;    Installation inf for Silicon Laboratories CP210X device using KDMF Version 1.5
;
;--*/

[Version]
Signature="$WINDOWS NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%Provider%
DriverVer=07/08/2008,5.3.0.0
CatalogFile=slabvcp.cat


; ================= Device section =====================

; -----------------------------------------------------------------------------
; Class Installer
; -----------------------------------------------------------------------------
;[ClassInstall32.NT]
;AddReg=PortsClass.NT.AddReg
;
;[PortsClass.NT.AddReg]
;HKR,,,,%PortsClassName%
;HKR,,Icon,,"-23"
;HKR,,Installer32,,"MsPorts.Dll,PortsClassInstaller"
;
; ------------------------------------------------------------------------------

[Manufacturer]
%MfgName%=SiLabs, NTamd64 ; Works for W2K and later

; For Win2K and later
[SiLabs]
%USB\VID_10C4&PID_EA60.DeviceDesc%=silabser.Dev, USB\VID_10C4&PID_EA60


; For x64
[SiLabs.NTamd64]
%USB\VID_10C4&PID_EA60.DeviceDesc%=silabser.Dev, USB\VID_10C4&PID_EA60

[silabser.Dev.NT]
Include=msports.inf
AddReg=silabser.AddReg,silabser.NT.AddReg
CopyFiles=silabser.Files.Ext

[silabser.Dev.NT.Services]
Include=msports.inf
Addservice = silabenm,,silabenm.AddService
Addservice = silabser,0x00000002,silabser.AddService

[silabser.AddService]
DisplayName    = %silabser.SvcDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %12%\silabser.sys
AddReg         = silabser.AddReg.Service
LoadOrderGroup = Extended Base

[silabenm.AddService]
DisplayName    = %silabenm.SvcDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %12%\silabenm.sys
LoadOrderGroup = PNP Filter

; common registry entries 
[silabser.AddReg]
HKR,,NTMPDriver,,silabser.sys
HKR,,RateLimitPurgeMS, 0x10001, 0x64, 0x00, 0x00, 0x00
HKR,,OverrideDefaultPortSettings, 0x10001, 01,00,00,00
HKR,,InitialBaudRate, 0x10001, 00,C2,01,00		;115200 initial baud rate
HKR,,InitialLineControl,, "8N1"				;8-bits, No parity, 1 stop bit

; only for NT...
[silabser.NT.AddReg]
HKR,,PortSubClass,1,01
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"

[silabser.AddReg.Service]
HKR, Parameters\Wdf, VerboseOn,       0x00010001, 1
HKR, Parameters\Wdf, VerifierOn,      0x00010001, 1
HKR, Parameters\Wdf, DbgBreakOnError, 0x00010001, 1

;------------------------------------------------
; Serenum for serial mice (assumes it is already installed)

[silabser.Dev.NT.HW]
AddReg=silabser.Dev.NT.HW.AddReg

[silabser.Dev.NT.HW.AddReg]
HKR,,"UpperFilters",0x00010000,"silabenm"

;------------------------------------------------

[silabser.Files.Ext]
silabser.sys
silabenm.sys

[SourceDisksNames.x86]
1=%Disk_Description%,"silabser.sys",,\x86

[SourceDisksNames.amd64]
1=%Disk_Description%,"silabser.sys",,\x64

[SourceDisksFiles]
silabser.sys = 1
silabenm.sys = 1

[DestinationDirs]
Silabser.Files.Ext = 12

;-------------- WDF Coinstaller installation

[DestinationDirs]
CoInstaller_CopyFiles = 11

[silabser.Dev.NT.CoInstallers]
AddReg=CoInstaller_AddReg
CopyFiles=CoInstaller_CopyFiles

[CoInstaller_CopyFiles]
WdfCoinstaller01005.dll

[SourceDisksFiles]
WdfCoinstaller01005.dll=1 ; make sure the number matches with SourceDisksNames

[CoInstaller_AddReg]
HKR,,CoInstallers32,0x00010000, "WdfCoinstaller01005.dll,WdfCoInstaller"

[silabser.Dev.NT.Wdf]
KmdfService = silabser, silabser_wdfsect
[silabser_wdfsect]
KmdfLibraryVersion = 1.5

;---------------------------------------------------------------;

[Strings]
Provider="Silicon Laboratories"
MfgName="Silicon Laboratories"
Disk_Description="Silicon Labs USB to UART Bridge Installation Disk"
USB\VID_10C4&PID_EA60.DeviceDesc="Silicon Labs CP210x USB to UART Bridge"
silabser.SvcDesc="Silicon Labs CP210x USB to UART Bridge Driver"
silabenm.SvcDesc="Silicon Labs CP210x USB to UART Bridge Serial Port Enumerator Driver"
PortsClassName = "Ports (COM & LPT)"